|
The P2770 network performance monitoring probe is a 19" 1U rack mounted unit equipped with 7 GbE (10/100/1000) port.
Supports up to 200 simultaneous sessions and is suitable in Access, Metro and Core Networks.
Specifications
| Form Factor
|
19" 1U Rack Mounted
|
| Ports |
7 GbE
|
| No. Sessions |
200 |
| No. Reflectors |
130 |
| Max PPS (Meas.) |
50000 pps |
| Dim. (HxWxD in mm) |
44 x 430 x 305
|
| Weight |
7.0 kg
|
| Operating Temp. |
5-40 C |
| Power Supply ext. |
12V DC (230 AC) or -48V DC |
All the specifications are subject to be changed without notice.
Supported Features
VLAN and QoS Configurable VLAN interfaces (IEEE 802.1q) and support for QoS settings:
IP-TOS, DSCP and VLAN Priority Bits (PBIT). Extensive IP Networking Capabilities Support to
attach multiple interfaces to one IP subnet and to direct a measurement stream via selected
interface and configurable gateway (nexthop). |
1xOneWay Data Sessions OneWay measurement streams supporting unicast and multicast
addressing and a complete set of configurable traffic streams: UDP, TCP, SCTP, RTP, ICMP and GRE.
|
1xOneWay VoIP Sessions OneWay measurement streams supporting unicast addressing and a
complete set of configurable RTP streams: G.711, G.723.1, G.729, G.729a, GSMEfr and GSMHr.
|
2xOneWay Data Sessions Dual OneWay unicast measurement streams toward a hosted reflector
Agent (UDP) or a Probe (UDP, TCP, SCTP, ICMP and GRE).
|
Ethernet OAM Sessions Support for ITU-T Y.1731 (and IEEE 802.1ag) sessions: Ethernet Loopback
(ETH-LB), Two-way Frame Delay Measurement (ETH-DM) and Vendor Specific OAM PDU (ETH-VSP)
implementing a layer-2 version of 2xOneWay.
|
Ethernet OAM Reflectors Support for ETH-LB, ETH-DM and ETH-VSP reflectors, with configurable
MEG Level settings per interface. |
TWAMP Light Sessions Support for Two-Way Active Measurement Protocol (TWAMP) Light sessions
as specified in RFC-5357. |
|
Echo Sessions Support for bidirectional ICMP Echo (RFC-792) and UDP Echo (RFC-862) sessions. |
Multicast Zapper Multicast channel zapper, IGMP (join/leave) performance test and channel/link
bandwidth monitoring.
|
Utility Tools CLI commands: Network scanning, Diagnostic Test Tool (including throughput test),
ICMP-Ping, UDP-Echo, TCP-Connect, Trace-Route, 2xOneWay, TWAMP Light, ETH-LB, ETH-DM and
ETH-VSP (layer-2 2xOneWay).
|
|
Products